Handles & Hardware · Wood-look handle
Wood Aluminium Handle
Aluminium handles with a wood-look face or a wood panel, for timber and wood-grain doors.
WOOD ALUMINIUM HANDLE
Wood-look faces on an aluminium body
The wood family is an aluminium handle with a wood-look or a wood panel face. The body gives the pull its strength and its fixing; the face gives it the warm grain or the solid panel that suits a timber entrance or a wood-grain door frame. Because the body is aluminium, the handle is finished on the same lines as the rest of the range, so a wood-grain door can carry a matching handle from one supplier.
Two face routes are catalogued: a wood-look finish applied to the handle face, and a handle built with a wood panel. Both sit over the same aluminium body, so the drill centres and the fixing method stay the same.
Key features
Four things it brings to the fit-up
Specification
The numbers, as published.
Values below are the published specification of the Wood Aluminium Handle. The complete dimensional pack and model list is supplied with the quotation.
- Family
- Wood-look and wood-panel handles
- Body
- Extruded aluminium
- Face
- Wood-look finish or wood panel
- Aluminium
- 6063-T5 primary aluminium
- Catalogue models
- JBM-8098, JBM-114, JBM-8067
- Fixing
- Model number fixes the mounting centres
- Supply
- OEM / ODM, private label, export packing
Gallery
More views of the series
Configurations
Three ways to specify the family
Details
Close-up views
Panels and finish
The wood-look route keeps the handle light and continuous in one grain, which is the simpler choice for a long run of doors where the handle should read as wood without adding weight. The wood-panel route puts a real panel on the face, which gives a deeper grain and a solid touch where the pull is used often.
Representative catalogue models are JBM-8098, JBM-114 and JBM-8067. The model number fixes the face route, and the finish is quoted with it so the handle matches the door grain inside the same order. Grain direction is specified with the model number, so a run of doors ordered together carries one reading of the face.
Where wood handles are used
These handles are written into the catalogue for timber entrances, wood-grain entrance leaves and interior doors where a metal pull would break the grain. In a full project the same family runs from the front door to the interior leaves, so the eye reads one material across the hallway.
The handle is catalogue hardware, ordered with the door profiles and shipped together. Where a project needs a particular grain direction or a match to the frame, that detail is confirmed against a sample before the order is packed. On a timber entrance the handle is the part most often touched, which is why the face routes put the wood on the grip rather than on a quiet edge of the leaf.
Ordering and packing
Wood handles are quoted by model and quantity, and each unit is bagged with its fixings. Locks, hinges and door closers are not part of this catalogue and are specified separately per project. Adam Alux extrudes 6063-T5 primary aluminium in-house and supports the range with OEM and ODM supply, private-label packing and export-standard containers.
Send the door type, the grain or panel you want and the model numbers, and the reply carries the finish, the quantities and the packing detail. Samples are available before a full order is placed.
Factory-direct
Who is behind the profile
Documentation
Brochure & spec sheetThe full handle catalogue (model list, drawings, finish cards) is sent with the quotation, in PDF on request.
Request the brochureFAQ
Asked about the handle range
What are the two face routes in this family?
A wood-look finish on the handle face, and a handle built with a wood panel on the face.
Which models are catalogued in the wood family?
JBM-8098, JBM-114 and JBM-8067 are the representative catalogue models.
Is the handle body wood?
No. The body is extruded aluminium; the wood-look finish or the wood panel sits on the face.
Can the handle be matched to the door grain?
Yes. The face finish and grain direction are confirmed against a sample before the order is packed.
Do the two face routes use the same fixing?
Yes. Both routes sit over the same aluminium body, so the drill centres and the fixing method are unchanged.
Do you supply under our own label?
Yes. OEM and ODM terms cover private-label packing, with export packing on request.
The rest of the range
More from the handle catalogue
Decorative entrance handle
Ornate Brass Door Handle
Ring pull handle
Ring and Loop Pull Handle
Decorative lattice panel
Decorative Aluminium LatticeAll six product families, with the JBM model list, are grouped in the hardware hub.
Ready to specify the Wood Aluminium Handle?
Send your opening size, panel layout and destination market, and we reply with a quotation, the dimensional pack and sample options.