Handles & Hardware · Decorative lattice panel
Decorative Aluminium Lattice
UNI DECOR lattice and grille panels for partitions, screens and door mullions.
DECORATIVE ALUMINIUM LATTICE
Decorative lattice and grille
Lattice is the patterned line of the catalogue: aluminium lattice and grille panels that carry a pattern rather than a plain face. The panels are made from the same extruded aluminium as the rest of the range, so a screen or a partition can be finished to match the door and window profiles in the same order.
The catalogue series for the range is UNI DECOR. The panels are supplied as catalogue items, quoted by model and quantity, and packed with the rest of an order for export.
Key features
Four things it brings to the fit-up
Specification
The numbers, as published.
Values below are the published specification of the Decorative Aluminium Lattice. The complete dimensional pack and model list is supplied with the quotation.
- Series
- UNI DECOR
- Product
- Decorative aluminium lattice and grille
- Catalogue range
- JBM-8050 through JBM-8060, plus JBM-8932
- Aluminium
- 6063-T5 primary aluminium
- Use
- Partitions, screens, door mullions
- Finish
- From the profile finish range
- Supply
- OEM / ODM, private label, export packing
Gallery
More views of the series
Configurations
Three ways to specify the family
Details
Close-up views
UNI DECOR series and model range
The catalogue range runs from JBM-8050 through JBM-8060, with JBM-8932 listed alongside it. Within the range the patterns differ in the density of the lattice and in the shape of the openings, so a project can pick a tighter screen for privacy or an open one for light and air.
The model number fixes the pattern. Because the panels are extruded aluminium, the finish is chosen from the same range as the door profiles, which keeps a screen and the door beside it in one tone. Two panels from the range can be used in one screen where the pattern changes between the lower and the upper part of the opening.
Partitions, screens and door mullions
Lattice panels are specified for partitions, screens and door mullions. In a partition they break a plain glazed run into a patterned band; in a screen they close off a view without closing off the light; in a door mullion they fill the narrow panel beside the leaf, which is where a plain infill would look blank.
Because the panels are aluminium, they take the same finishing routes as the frames, so a lattice mullion and its door read as one assembly. The pattern is carried through a run by keeping the same model number from the first opening to the last. In a partition the panels are held between the same profiles that carry the glazing, which is why the pattern and the finish are ordered together.
Ordering and packing
Lattice is quoted by model and quantity and ships with the rest of the order. Locks, hinges and door closers fall outside this catalogue and are specified per project, the same as for the handle families. Adam Alux extrudes 6063-T5 primary aluminium in-house and supplies the range under OEM and ODM terms with private-label packing and export-standard containers.
Send the opening, the pattern you want and the model numbers, and the quotation returns with quantities, finish detail and packing. Sample panels are available on request before a full order. The lattice is cut and joined to the opening in the same schedule as the frames, so the pattern lines up with the door beside it.
Factory-direct
Who is behind the profile
Documentation
Brochure & spec sheetThe full handle catalogue (model list, drawings, finish cards) is sent with the quotation, in PDF on request.
Request the brochureFAQ
Asked about the handle range
What is the catalogue series for the lattice?
The decorative lattice and grille is catalogued under the UNI DECOR series.
Which model range covers the lattice patterns?
JBM-8050 through JBM-8060, with JBM-8932 listed alongside the range.
Where are the lattice panels used?
Partitions, screens and door mullions, where a plain infill would leave a blank panel.
Can a screen match the door profiles?
Yes. The panels are extruded 6063-T5 primary aluminium and are finished from the same range as the profiles.
Do the patterns differ in openness?
Yes. The range covers tighter screens for privacy and more open lattices for light and air.
Are sample panels available?
Yes. Sample panels are available on request before a full order is placed.
The rest of the range
More from the handle catalogue
Glass door handle
Crystal Aluminium Door Handle
Bar handle
Stainless Steel Bar Handle
Wood-look handle
Wood Aluminium HandleAll six product families, with the JBM model list, are grouped in the hardware hub.
Ready to specify the Decorative Aluminium Lattice?
Send your opening size, panel layout and destination market, and we reply with a quotation, the dimensional pack and sample options.