Handles & Hardware · Ring pull handle
Ring and Loop Pull Handle for Aluminium Doors
Circular ring pulls and loop pull forms for narrow stiles and interior leaves.
RING AND LOOP PULL HANDLE
Ring and loop pull handles
This family covers pulls built around a circle. A ring pull puts a full circular grip on the face of the door; a loop form bends the bar into a closed shape that the hand passes through. Both give a small, positive grip on a leaf, and both are drawn so the pull mounts on a face without a long horizontal bar.
Representative catalogue models are JBM-9025 and JBM-8670. The two forms are stocked as catalogue items and are quoted by model and quantity, in the same way the bar families are. Both forms are compact, so a small leaf can carry a pull without a long fixing line.
Key features
Four things it brings to the fit-up
Specification
The numbers, as published.
Values below are the published specification of the Ring and Loop Pull Handle. The complete dimensional pack and model list is supplied with the quotation.
- Family
- Ring and loop pull handles
- Forms
- Circular ring pull, loop pull
- Mount
- Single face fixing
- Aluminium
- 6063-T5 primary aluminium
- Catalogue models
- JBM-9025, JBM-8670
- Use
- Narrow stiles and interior leaves
- Supply
- OEM / ODM, private label, export packing
Gallery
More views of the series
Configurations
Three ways to specify the family
Details
Close-up views
Ring and loop forms
The ring pull is the plainer of the two. Its circular grip turns on the mount, so the pull is worked by the ring rather than by a fixed bar. The loop form fixes the shape to the face and gives a wider opening for the hand, which suits a heavier leaf or a door that is pulled from a standing position.
Both forms mount with a single face fixing, which keeps the drilling simple on a narrow stile. Model choice normally follows the width of the stile and the way the door is handled, rather than the size of the leaf. A ring pull can also be paired with a bar pull on the same door where one leaf is glazed and the other is solid, and the two still sit level on the face.
Where ring and loop pulls are used
These pulls are written into the catalogue for interior leaves, cupboard and wardrobe doors, and small entrance doors where a horizontal bar would run past the edge of the stile. The circular grip takes up little width, so the pull can sit on a narrow frame without overhanging.
Because the family is compact, it is often used across a run of interior doors in one finish and repeated on the doors that are seen from the same room. The pull is catalogue hardware and is ordered with the door profiles in the same consignment. The same form is repeated across a run so the pulls sit level from door to door.
Ordering and packing
Ring and loop pulls are quoted by model and quantity, and each unit is bagged with its fixings for export packing. Locks, hinges and door closers are quoted on their own, as they are for every family in this catalogue. Adam Alux extrudes its aluminium in-house from 6063-T5 primary aluminium and supplies the catalogue under OEM and ODM terms, with private-label packing on request.
Send the stile width, the finish and the model numbers you need, and the quotation returns with quantities and packing detail. Sample units are available for checking before the order is confirmed.
Factory-direct
Who is behind the profile
Documentation
Brochure & spec sheetThe full handle catalogue (model list, drawings, finish cards) is sent with the quotation, in PDF on request.
Request the brochureFAQ
Asked about the handle range
Which models cover the ring and loop family?
JBM-9025 and JBM-8670 are the representative catalogue models.
How do the two forms differ?
The ring pull turns on its mount; the loop form is fixed to the face and gives a wider opening for the hand.
How is the handle fixed to the door?
Both forms use a single face fixing, which keeps the drilling simple on a narrow stile.
Are these pulls suitable for interior doors?
Yes. They are catalogued for interior leaves, cupboard and wardrobe doors, and narrow entrance stiles.
Can we order one form for a run of doors?
Yes. The forms are catalogue items quoted by model and quantity, so one form can cover a run in one finish.
Is private-label packing available?
Yes. OEM and ODM terms cover private-label and export packing.
The rest of the range
More from the handle catalogue
Decorative lattice panel
Decorative Aluminium Lattice
Glass door handle
Crystal Aluminium Door Handle
Bar handle
Stainless Steel Bar HandleAll six product families, with the JBM model list, are grouped in the hardware hub.
Ready to specify the Ring and Loop Pull Handle?
Send your opening size, panel layout and destination market, and we reply with a quotation, the dimensional pack and sample options.