Market Supply
Aluminium Windows and Doors for the UAE: Coastal Heat and High-Rise Facades
Dubai prices a window twice, once for the sun and once for the sea. A tower on the coast takes salt on the finish and wind pressure on the frame at the same time, and a retail podium wants a facade that still reads clean from the road after a summer. The factory behind Adam Alux Systems has run aluminium window and door production since 1997 from three plants in China, and quotes UAE work from the opening schedule and the elevation.
Salt first, then sun
On a Gulf elevation the finish takes the weather before the glass does. Salt haze settles on the frames, spray reaches the lower floors on a windy day, and the sun then bakes whatever has collected there. Fluorocarbon holds colour and edge coverage through that cycle where a thin anodised layer chalks, so it is the line quoted for sea-facing facades. Anodised stays on sheltered faces and interior returns, and RAL matching keeps a building on one colour across phases.
Wind pressure on a tall facade
Height changes the frame before anything else does. A unit thirty floors up takes a pressure a podium unit never sees, and the answer is wall thickness and fixing detail rather than a heavier sightline. The 118 casement window runs a 2.0 mm wall through six chambers, which holds a tall single light without the sash deflecting off its gasket. The 112 casement window keeps five chambers and a flush inner line on the same wall thickness. Storey count belongs in the enquiry.
Glass, sun and cooling load
Cooling runs every month of the year here, so the glass carries a permanent load. The standard window unit is 5-20 A-5 insulating glass, and the 118 line widens the cavity to 5-27 A-5. A coated outer pane cuts the radiant share on a west or south-west face, which is where a tower's cooling demand is set. Frosted and reeded options cover bathrooms and back-of-house. The build-up is written per elevation at quotation.
Two-tone facades, cast entrances
Commercial work often wants one colour outside and another in: a dark grey on the street face, a light one behind the shopfront. Two-tone leaves handle that on one profile, with the split at the frame line where it is least visible. At a hotel or villa entrance the specification moves to cast aluminium, where the Anyue one-piece cast leaf gives the door a solid carved face on a sealed thermal-break frame. Both are priced with the same dimensional pack.
Jebel Ali and the submittal set
Containers leave through Jebel Ali, and the loading plan is built around the phase the site can take, since a tower and its podium rarely close together. Every quotation carries a dimensional pack on PDF, with CAD drawings on request, and a sample profile set or one finished test unit can be sent for the consultant's review. Lead times are confirmed with the quotation once the series, glazing and finish are fixed.
FAQ
Frequently asked
Which certification covers a UAE delivery?
The file holds one attestation: CE to EN 14351-1, no. M.2024.206.C101817, issued by UDEM. There is no local listing in the United Arab Emirates. Where a consultant asks for a municipal or civil defence submission, the drawing set and the glazing build-up are prepared against that requirement at quotation, and nothing beyond the CE document is claimed.
What finish survives salt spray on a sea-facing tower?
Fluorocarbon, on elevations within reach of spray. It holds colour and edge coverage where anodising chalks, and it takes RAL matching and two-tone faces on request. Stainless hardware goes on the same elevation, since salt works on handles and hinges as readily as on the frame. Physical swatches are sent before the order, because Gulf light shifts a colour that looked right indoors.
118 or 112 for a high-rise unit?
Both take a 2.0 mm wall, so the difference is chamber count and the sash line. The 118 carries six chambers and a 5-27 A-5 cavity, which suits a tall single light on an exposed corner. The 112 runs five chambers with a flush-line sash. Fixing detail and mullion depth are checked against the height of the opening at quotation.
Why two-tone on a commercial facade?
Because a mall or a hotel usually wants two readings from one opening. The street face carries the brand colour, the room side stays light so the interior does not darken at the reveal, and the split sits at the frame line. The finish goes onto the same extrusion, so the profile, the rebate and the hardware do not change with it.
How does a UAE order move from drawing to container?
The opening schedule and the elevation drawings come first, then the series, glazing and finish are confirmed against them in the quotation. Jebel Ali takes the containers, and the loading plan follows the site's phases. A PDF dimensional pack ships with the quote, CAD on request, and samples or a finished test unit can go ahead of production. Lead times are confirmed with the quotation.
Send your opening schedule
Series, glazing and finish come back as one quotation, with the full dimensional pack on PDF and CAD on request.