Market · Africa
Wave Entrance Door for Africa
The Wave Ripple Wood-Grain Entrance Door is configured here for Africa. The figures below are the published catalogue specification of the series; the market section covers what projects in Africa add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
Wave Ripple Wood-Grain Entrance Door · Africa
Wave Ripple Wood-Grain Entrance Door
A carved ripple wood-grain leaf on a sealed thermal-break entrance frame. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Single-leaf swing, with or without a fixed sidelight
- Door style
- Ripple wood-grain carved face
- Structural build
- Aviation-grade aluminium plate · 1.0 mm steel plate · B1 flame-retardant board · thermal-break profile · automotive-grade sealing strip · PA66 insulation strip · aluminium or wooden backboard
- Leaf face
- Carved ripple wood-grain pattern · warm grain tones
- Frame
- Aluminium with thermal-break profiles
- Glazing
- Tempered glass sidelight where the catalogue draws it
- Performance (catalogue ratings)
- Sound 5 · thermal 8 · water 8 · air 8 · wind 9
- Hardware
- L8 face lock (palmar-vein option) · N6 fingerprint lock · F3 to F6 embedded locks with motor linkage · H3 horizontal handle
- Finishes
- No catalogue colour card · wood-grain tones confirmed on request
Engineering
Ripple wood-grain faceThe catalogue draws the leaf with a carved ripple pattern that reads as moving wood grain, cut across the full face so the surface shifts with the light.
Warm grain toneThe pieces are shown in warm wood tones, so the carved face sits beside render and stone villa fronts as a timber-tone leaf held in aluminium.
Sealed entrance buildThe carved leaf is built on a thermal-break aluminium frame with an automotive-grade sealing strip and PA66 insulation strips, the build the catalogue names across the entrance range.
Smart-lock readyThe hardware pages list the L8 face lock with an optional palmar-vein function, the N6 fingerprint lock and the F3 to F6 embedded locks with motor linkage, plus the H3 horizontal handle.
Specifying for heat and value
African projects are usually specified against two drivers: heat, and the total landed cost of the glazing line. Single-glass build-ups cut weight and freight in the container; insulating units step in where comfort or acoustics are required. Both run on the same frame, so the build-up is a line on the quotation, not a different product.
Wall thickness and finish are the second lever. The 6063-T5 sections in the range are extruded in-house, and the anodised and thermal-transfer finish lines are the standard shortlist.
Full-container loading
The container is the unit of supply: a full box of modules for one phase, packed upright with edge protection, with the loading plan drawn against your opening schedule.
Transit to the port of discharge, and the documentation for clearing, travel with the shipment. Transit times are confirmed per route at quotation.
Projects in Africa
villa · night scene
Modern villa at night
Modern villa rendered at night: light lines under the eaves and a lit gate front.
villa · day scene
Three-storey villa, glass corner
Three-storey villa with a structural glass corner and pool-side elevation.
hotel · day scene
Tented camp hotel with pool
Tented camp hotel arranged around a central pool, palms and open lawns.
FAQ
Frequently asked
Do you ship to West and East Africa?
Yes. Full-container loading is the standard supply unit, and the loading plan for your opening schedule comes with the quotation.
Can we mix single and insulating glass in one container?
Yes. The glazing build-up is specified per opening on the schedule, so one container can carry both configurations; the mix is confirmed in the loading plan.
What is the Wave ripple wood-grain entrance door?
It is the ripple wood-grain line shown inside the high-end art section of the AURORA entrance range, printed on catalogue page 011 as WAVE SERIES DOORS, with the lead piece M-007 and further pieces M-008 and M-009.
How is the ripple face made?
The leaf carries a carved ripple pattern cut in relief across the full face, so the surface reads as moving wood grain and shifts with the light. It is held in a thermal-break aluminium frame.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Africa, with the full dimensional pack on PDF and CAD on request.