Market · Africa
Dingrui Entrance Door for Africa
The Dingrui High-End Art Entrance Door is configured here for Africa. The figures below are the published catalogue specification of the series; the market section covers what projects in Africa add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
Dingrui High-End Art Entrance Door · Africa
Dingrui High-End Art Entrance Door
The high-end art line of the entrance range: a faceted or carved art leaf on a sealed thermal-break frame. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Single-leaf swing, with or without a fixed sidelight
- Door style
- High-end art leaf: faceted geometric face or carved cast texture
- Structural build
- Aviation-grade aluminium plate · 1.0 mm steel plate · B1 flame-retardant board · thermal-break profile · automotive-grade sealing strip · PA66 insulation strip · aluminium or wooden backboard
- Leaf face
- Faceted geometric panel · carved cast texture · vermilion copper-cast face
- Frame
- Aluminium with thermal-break profiles
- Glazing
- Tempered glass sidelight where the catalogue draws it
- Performance (catalogue ratings)
- Sound 5 · thermal 8 · water 8 · air 8 · wind 9
- Hardware
- L8 face lock (palmar-vein option) · N6 fingerprint lock · F3 to F6 embedded locks with motor linkage · H3 horizontal handle
- Finishes
- No catalogue colour card · confirmed against samples on request
Engineering
High-end art leafThe catalogue draws the series as an art leaf, a faceted geometric face or a carved cast texture, lit by recessed light strips in the M-001 and M-002 pieces.
Vermilion copper-cast faceThe catalogue shows a vermilion copper-cast leaf with carved detail, the piece it ties to the dignity of noble lineages and the auspiciousness of the East.
Sealed entrance buildThe leaf is built on a thermal-break aluminium frame with an automotive-grade sealing strip and PA66 insulation strips, the build the catalogue names across the entrance range.
Smart-lock readyThe hardware pages list the L8 face lock with an optional palmar-vein function, the N6 fingerprint lock and the F3 to F6 embedded locks with motor linkage, plus the H3 horizontal handle.
Specifying for heat and value
African projects are usually specified against two drivers: heat, and the total landed cost of the glazing line. Single-glass build-ups cut weight and freight in the container; insulating units step in where comfort or acoustics are required. Both run on the same frame, so the build-up is a line on the quotation, not a different product.
Wall thickness and finish are the second lever. The 6063-T5 sections in the range are extruded in-house, and the anodised and thermal-transfer finish lines are the standard shortlist.
Full-container loading
The container is the unit of supply: a full box of modules for one phase, packed upright with edge protection, with the loading plan drawn against your opening schedule.
Transit to the port of discharge, and the documentation for clearing, travel with the shipment. Transit times are confirmed per route at quotation.
Projects in Africa
villa · day scene
Estate villa with pool pavilion
Estate villa with a guest pavilion, stone entrance gate and pool terrace at dusk.
hotel · day scene
Low-rise hotel, curved roofline
Low-rise hotel with a curved white roofline, corner and front elevations at dusk.
apartment · day scene
White apartment block
White apartment block with recessed balconies and planted roofline edges.
FAQ
Frequently asked
Do you ship to West and East Africa?
Yes. Full-container loading is the standard supply unit, and the loading plan for your opening schedule comes with the quotation.
Can we mix single and insulating glass in one container?
Yes. The glazing build-up is specified per opening on the schedule, so one container can carry both configurations; the mix is confirmed in the loading plan.
What is the Dingrui high-end art entrance door?
It is the high-end art line of the AURORA entrance range, printed from catalogue page 007 as section 007P, with six pieces from M-001 to M-006 drawn as a faceted or carved art leaf on a sealed thermal-break frame.
What is the art leaf made of?
The leaf face is a faceted geometric panel or a carved cast texture, and the M-006 piece is a vermilion copper-cast leaf with carved detail. It sits on a thermal-break aluminium frame.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Africa, with the full dimensional pack on PDF and CAD on request.