Market · Southeast Asia
Anyue Cast Entrance Door for Southeast Asia
The Anyue One-Piece Cast-Aluminium Entrance Door is configured here for Southeast Asia. The figures below are the published catalogue specification of the series; the market section covers what projects in Southeast Asia add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
Anyue One-Piece Cast-Aluminium Entrance Door · Southeast Asia
Anyue One-Piece Cast-Aluminium Entrance Door
The one-door-one-scene line of the entrance range: a one-piece cast-aluminium face on a sealed thermal-break frame. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Single leaf, with a secondary leaf or a fixed glass panel where shown
- Door style
- One-piece cast-aluminium face, one door one scene
- Structural build
- Aviation-grade aluminium plate · 1.0 mm steel plate · B1 flame-retardant board · thermal-break profile · automotive-grade sealing strip · PA66 insulation strip · aluminium or wooden backboard
- Leaf face
- One-piece cast aluminium · cast architectural relief · no joints
- Frame
- Aluminium with thermal-break profiles
- Glazing
- Fixed glass panel where the catalogue draws it
- Performance (catalogue ratings)
- Sound 5 · thermal 8 · water 8 · air 8 · wind 9
- Hardware
- L8 face lock (palmar-vein option) · N6 fingerprint lock · F3 to F6 embedded locks with motor linkage · H3 horizontal handle
- Finishes
- No catalogue colour card · confirmed against samples on request
Engineering
One-piece cast leafThe catalogue casts the leaf as one aluminium body with no joints, so the architectural relief runs unbroken across the face.
Cast-in reliefThe pattern is cast into the face rather than applied, and the mould leaves the natural grain the catalogue compares to stone, timber and bronze.
Differentiated thermal-break buildThe cast leaf sits on the thermal-break system the catalogue prints on page 043, from an aviation-grade aluminium plate and a 1.0 mm steel plate through B1 flame-retardant board, PA66 insulation strip and automotive-grade sealing strip to the aluminium or wooden backboard.
Smart-lock readyThe hardware pages list the L8 face lock with an optional palmar-vein function, the N6 fingerprint lock and the F3 to F6 embedded locks with motor linkage, plus the H3 horizontal handle.
Heat, humidity and salt air
Southeast Asian sites push three things at aluminium: sustained heat, high humidity and, on the coast, salt spray. The finish carries the corrosion load, which is why fluorocarbon and powder lines are the standard shortlist for coastal work, with EPDM sealing and open self-cleaning drainage handling the moisture inside the section.
Glazing is specified per project: single glass where cooling load is the driver, insulating units where comfort is. The build-up comes back on the quotation against your climate and the budget line for the envelope.
Ports and logistics for the region
The main ports in the region are covered by standard export packing: modules travel upright, edge-protected, in 20 ft or 40 ft containers, and the loading plan for your opening mix ships with the quotation.
Transit times vary by origin port and destination, so they are confirmed per shipment rather than quoted from a fixed table.
Reference projects in comparable climates
hotel · day scene
Resort hotel, pool frontage
Low-rise blocks set behind an infinity pool, with framed glazing opening the ground floor to the deck.
apartment · day scene
Apartments, recessed balconies
White volumes with deep recessed balconies and vertical sunshades cut the direct sun before it reaches the glass.
villa · day scene
Townhouse, timber screens
A compact two-storey volume around a planted courtyard, with timber screens filtering the street side.
FAQ
Frequently asked
Which finishes hold up in coastal Southeast Asia?
Fluorocarbon and anodised lines are the standard shortlist against salt spray. RAL matching and two-tone exterior/interior combinations are available on request.
Do you ship to the Philippines and Malaysia?
Yes. Modules ship to ports across the region in export-standard containers, and the loading plan with the transit confirmation comes with the quotation.
What is the Anyue one-piece cast-aluminium entrance door?
It is the one-door-one-scene line of the AURORA entrance range, printed from catalogue page 043 as section 045P, with eight pieces from M-001 to M-008. The leaf is cast as one aluminium body with no joints.
How is the cast face different from an applied panel?
The catalogue casts the piece in one pour and casts the architectural relief into the face rather than applying it, so the pattern runs unbroken and the mould leaves a natural grain.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Southeast Asia, with the full dimensional pack on PDF and CAD on request.