Market · Africa
Anyue Cast Entrance Door for Africa
The Anyue One-Piece Cast-Aluminium Entrance Door is configured here for Africa. The figures below are the published catalogue specification of the series; the market section covers what projects in Africa add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
Anyue One-Piece Cast-Aluminium Entrance Door · Africa
Anyue One-Piece Cast-Aluminium Entrance Door
The one-door-one-scene line of the entrance range: a one-piece cast-aluminium face on a sealed thermal-break frame. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Single leaf, with a secondary leaf or a fixed glass panel where shown
- Door style
- One-piece cast-aluminium face, one door one scene
- Structural build
- Aviation-grade aluminium plate · 1.0 mm steel plate · B1 flame-retardant board · thermal-break profile · automotive-grade sealing strip · PA66 insulation strip · aluminium or wooden backboard
- Leaf face
- One-piece cast aluminium · cast architectural relief · no joints
- Frame
- Aluminium with thermal-break profiles
- Glazing
- Fixed glass panel where the catalogue draws it
- Performance (catalogue ratings)
- Sound 5 · thermal 8 · water 8 · air 8 · wind 9
- Hardware
- L8 face lock (palmar-vein option) · N6 fingerprint lock · F3 to F6 embedded locks with motor linkage · H3 horizontal handle
- Finishes
- No catalogue colour card · confirmed against samples on request
Engineering
One-piece cast leafThe catalogue casts the leaf as one aluminium body with no joints, so the architectural relief runs unbroken across the face.
Cast-in reliefThe pattern is cast into the face rather than applied, and the mould leaves the natural grain the catalogue compares to stone, timber and bronze.
Differentiated thermal-break buildThe cast leaf sits on the thermal-break system the catalogue prints on page 043, from an aviation-grade aluminium plate and a 1.0 mm steel plate through B1 flame-retardant board, PA66 insulation strip and automotive-grade sealing strip to the aluminium or wooden backboard.
Smart-lock readyThe hardware pages list the L8 face lock with an optional palmar-vein function, the N6 fingerprint lock and the F3 to F6 embedded locks with motor linkage, plus the H3 horizontal handle.
Specifying for heat and value
African projects are usually specified against two drivers: heat, and the total landed cost of the glazing line. Single-glass build-ups cut weight and freight in the container; insulating units step in where comfort or acoustics are required. Both run on the same frame, so the build-up is a line on the quotation, not a different product.
Wall thickness and finish are the second lever. The 6063-T5 sections in the range are extruded in-house, and the anodised and thermal-transfer finish lines are the standard shortlist.
Full-container loading
The container is the unit of supply: a full box of modules for one phase, packed upright with edge protection, with the loading plan drawn against your opening schedule.
Transit to the port of discharge, and the documentation for clearing, travel with the shipment. Transit times are confirmed per route at quotation.
Projects in Africa
villa · day scene
Three-storey villa, gold roofline
Three-storey villa with a gold-toned roofline, shown in daylight and at night.
villa · day scene
Estate villa with pool pavilion
Estate villa with a guest pavilion, stone entrance gate and pool terrace at dusk.
hotel · day scene
Low-rise hotel, curved roofline
Low-rise hotel with a curved white roofline, corner and front elevations at dusk.
FAQ
Frequently asked
Do you ship to West and East Africa?
Yes. Full-container loading is the standard supply unit, and the loading plan for your opening schedule comes with the quotation.
Can we mix single and insulating glass in one container?
Yes. The glazing build-up is specified per opening on the schedule, so one container can carry both configurations; the mix is confirmed in the loading plan.
What is the Anyue one-piece cast-aluminium entrance door?
It is the one-door-one-scene line of the AURORA entrance range, printed from catalogue page 043 as section 045P, with eight pieces from M-001 to M-008. The leaf is cast as one aluminium body with no joints.
How is the cast face different from an applied panel?
The catalogue casts the piece in one pour and casts the architectural relief into the face rather than applying it, so the pattern runs unbroken and the mould leaves a natural grain.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Africa, with the full dimensional pack on PDF and CAD on request.